Best mitutoyo absolute digital caliper for 2020

When it comes to choosing your mitutoyo absolute digital caliper, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best mitutoyo absolute digital caliper. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best mitutoyo absolute digital caliper.

Best mitutoyo absolute digital caliper

Product Features Editor's score Go to site
Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6 Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm Measuring Range, 0.0005"/0.01mm Resolution, LCD
Go to amazon.com
Mitutoyo 500-753-20,0Caliper, DIGIMATIC, 0-8 Mitutoyo 500-753-20,0Caliper, DIGIMATIC, 0-8", IP67, 0005" 0/01 mm No SPC
Go to amazon.com
Mitutoyo 500-754-20 Digital ABS Caliper Thumb Roller w/o Data Output Mitutoyo 500-754-20 Digital ABS Caliper Thumb Roller w/o Data Output
Go to amazon.com
Mitutoyo 500-506-10 Absolute Digimatic Caliper, Inch/Metric, Stainless Steel Jaws, 0-24 Mitutoyo 500-506-10 Absolute Digimatic Caliper, Inch/Metric, Stainless Steel Jaws, 0-24" (0-600mm) Range, 0.0005" (0.01mm) Resolution, +/-0.002" Accuracy
Go to amazon.com
Absolute Digital Caliper, 0 to 12 in Absolute Digital Caliper, 0 to 12 in
Go to amazon.com
MITUTOYO 500-195-30 0-4 MITUTOYO 500-195-30 0-4" MyCAL Absolute Digimatic Caliper
Go to amazon.com
Mitutoyo 500-197-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 8 Mitutoyo 500-197-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 8"/0 to 200mm Measuring Range, 0.0005"/0.01mm Resolution, LCD
Go to amazon.com
Mitutoyo 500-171-30 Advanced Onsite Sensor Absolute Scale Digital Caliper, 0-6 Mitutoyo 500-171-30 Advanced Onsite Sensor Absolute Scale Digital Caliper, 0-6" Range
Go to amazon.com
Mitutoyo 500-195-30 Advanced Onsite Sensor Absolute Scale Digital Caliper, 0-4 Mitutoyo 500-195-30 Advanced Onsite Sensor Absolute Scale Digital Caliper, 0-4" Range, Stainless Steel
Go to amazon.com
Mitutoyo 505-746 Dial Caliper, 0.1 Mitutoyo 505-746 Dial Caliper, 0.1" per Rev, 0-12" Range, 0.002" Accuracy, White Face
Go to amazon.com
Related posts:

1. Mitutoyo 500-196-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm Measuring Range, 0.0005"/0.01mm Resolution, LCD

Feature

Measures 0 to 6" (0 to 150mm) in 0.0005" (0.01mm) increments for precision use
Digital readout LCD shows inch or metric units for versatility when measuring
Advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water
Measures inside, outside, depth, and step values for versatility
Includes protective case and SR44 silver oxide battery

Description

The Mitutoyo 500-196-30 digital caliper has a 0 to 6" (0 to 150mm) measuring range with 0.0005" (0.01mm) increments for precision and an advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water. Its digital readout LCD shows inch or metric units for versatility, and allows either absolute or incremental measurement readings. The electronic caliper measures inside, outside, depth, and step values for versatility and includes a protective case and SR44 silver oxide battery.

Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements, which are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Compared to dial calipers, digital calipers provide measurements that are faster, easier, and more error-free, but they are more fragile mechanically and electronically, and do not resist coolant well. Vernier calipers are more durable than digital calipers because they do not have internal moving parts, but they can be more difficult to read. Digital calipers are commonly used in fields such as metalworking, mechanical engineering, machining, carpentry, and medicine.

Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL.

What's in the Box?

  • Electronic caliper
  • SR44 battery
  • Protective case

2. Mitutoyo 500-753-20,0Caliper, DIGIMATIC, 0-8", IP67, 0005" 0/01 mm No SPC

Feature

Advanced design styling, easy to use-no need to clean
Incorporates absolute measurement system
Automatic power-on/off

Description

0-8 in/0-200mm, .0005 in/0.01mm, IP67 absolute coolant proof caliper, no output

3. Mitutoyo 500-754-20 Digital ABS Caliper Thumb Roller w/o Data Output

Feature

Hardened stainless steel construction for protection of caliper and ABSOLUTE linear encoder technology components
Four-way measurement capability for multiple applications: outside diameter (OD), inside diameter (ID), depth, and step
Digital, single-value readout LCD display in inch and metric units for readability
Function control buttons on caliper face for ease of access: Origin, On/Off, and Zero/ABS (Absolute Scale)
IP67-certified for protection against dust and temporary submersion in water

Description

The Mitutoyo 500 series ABSOLUTE Coolant Proof Caliper is a dust and water resistant digital caliper made of durable hardened stainless steel using Mitutoyos ABSOLUTE linear encoder technology. This caliper conforms to IP67 protection levels enabling it to operate in workshop conditions exposed to water, dust, coolant, or oils.

Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper has an LCD that displays in inch and metric units which increases reading reliability, and reflects all ABSOLUTE system activities. This digital caliper has accessible function control buttons, such as Origin to set and retain the original measuring point, On/Off to automatically shut off the caliper after 30 minutes, and Zero/ABS (Absolute Scale) to zero-set the LCD display. The Absolute Scale (ABS) function tracks the set origin point, even after shutoff. Once on again, the caliper can immediately start measuring, without zero resetting. The LCD can be "zeroed out" before making and comparing incremental measurements without having to subtract the first measurement from the second.

The 500 series ABSOLUTE Coolant Proof Caliper has the ABSOLUTE electromagnetic induction linear encoder to help prevent overspeed errors. It measures outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. LCD resolution is .0005" (0.01mm), and repeatability is .0005" (0.01mm). Dust/water protection level is Ingress Protection 67 (IP67)-certified, which means that the electronic components are resistant to debris and to submersion in liquid under standard conditions for up to 30 minutes. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scales position. Response speed is unlimited. Each caliper includes, and is powered by, one SR44 silver oxide cell battery that lasts approximately 3 years with normal use.

Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units.

Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

4. Mitutoyo 500-506-10 Absolute Digimatic Caliper, Inch/Metric, Stainless Steel Jaws, 0-24" (0-600mm) Range, 0.0005" (0.01mm) Resolution, +/-0.002" Accuracy

Feature

Caliper measures 0 to 24.0" (0 to 600mm) with 0.0005" (0.01mm) resolution and + or - 0.002" accuracy, for measuring inside and outside diameters, depth, and step of items in harsh workshop conditions
LCD screen displays in inches and metric units
Absolute electrostatic capacitance-type linear encoder for accurate measurements
780mm body length for measuring large items
Jaws are constructed of stainless steel for durability

5. Absolute Digital Caliper, 0 to 12 in

Feature

Hardened stainless steel construction for protection of caliper components
Four-way measurement capability for multiple applications: outside diameter (OD), inside diameter (ID), depth, and step
Digital, single-value readout LCD display in metric units for readability
Position memory for retaining measurements
Function control buttons on the face, for ease of use: Origin, On/Off, and Zero/ABS (Absolute Scale)

6. MITUTOYO 500-195-30 0-4" MyCAL Absolute Digimatic Caliper

Feature

Hardened stainless steel construction for protection of caliper components
Four-way measurement capability for multiple applications: outside diameter (OD), inside diameter (ID), depth, and step
Digital, single-value readout LCD display in metric units for readability
Position memory for retaining measurements
Function control buttons on the face, for ease of use: Origin, On/Off, and Zero/ABS (Absolute Scale)

7. Mitutoyo 500-197-30 Advanced Onsite Sensor (AOS) Absolute Scale Digital Caliper, 0 to 8"/0 to 200mm Measuring Range, 0.0005"/0.01mm Resolution, LCD

Feature

Measures 0 to 8" (0 to 200mm) in 0.0005" (0.01mm) increments for precision use
Digital readout LCD shows inch or metric units for versatility when measuring
Advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water
Measures inside, outside, depth, and step values for versatility
Includes protective case and SR44 silver oxide battery

8. Mitutoyo 500-171-30 Advanced Onsite Sensor Absolute Scale Digital Caliper, 0-6" Range

Feature

New electromagnetic inductive AOS sensor- Improved resistance to environmental conditions such as dirt, oil and water that can cause false readings
Increased battery life - 3.5 years under normal operation
ABS sensor - Eliminates the necessity of setting the reference when tool is powered on
Fully compatible with existing Mitutoyo digimatic peripherals

9. Mitutoyo 500-195-30 Advanced Onsite Sensor Absolute Scale Digital Caliper, 0-4" Range, Stainless Steel

Feature

Increased battery life - 3.5 years under normal operation
ABS sensor - Eliminates the necessity of setting the reference when tool is powered on
New electromagnetic inductive AOS sensor- Improved resistance to environmental conditions such as dirt, oil and water that can cause false readings
0-4" Range

10. Mitutoyo 505-746 Dial Caliper, 0.1" per Rev, 0-12" Range, 0.002" Accuracy, White Face

Feature

New designed digital movement for ultra smooth sliding and high shock protection
Titanium nitride (tin) coating is applied to the sliding surface to increase wear resistance
Lock screw for digital bezel and for holding the sliding jaw postion
Item Package Dimension: 18.0" L x 5.5" W x 1.5" H

Conclusion

All above are our suggestions for mitutoyo absolute digital caliper. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using mitutoyo absolute digital caliper with us by comment in this post. Thank you!

You may also like...